M.2 Enclosure
Q: The M.2 cannot be recognized by my computer.
A: Please try the below steps:
- Plug & replug the USB connector for more times, or try to test with another USB port & cable.
- Restart the computer after connected.
- Update or reinstall your computer's USB host driver.
- Test it with another NVMe M.2 SSD and computer.
Q: How to install the enclosure? (For AX-S202AGY only)
A: Please follow the below steps to install the enclosure.
- Remove the screw, open the ft cover, and remove the cover and pull out the ft PCBA.
- Insert M.2 SSD to PCIe/NVMe SATA slot and press M.2 SSD down and match the screw slot.
- Lock M.2 SSD with screws.
- Put ft PCBA back to the enclosure, screw on the ft cover, plug the USB C cable, connect to the computer.
A: Please try the below steps:
- Plug & replug the USB connector for more times, or try to test with another USB port & cable.
- Restart the computer after connected.
- Update or reinstall your computer's USB host driver.
- Test it with another NVMe M.2 SSD and computer.
Q: How to install the enclosure? (For AX-S202AGY only)
A: Please follow the below steps to install the enclosure.
- Remove the screw, open the ft cover, and remove the cover and pull out the ft PCBA.
- Insert M.2 SSD to PCIe/NVMe SATA slot and press M.2 SSD down and match the screw slot.
- Lock M.2 SSD with screws.
- Put ft PCBA back to the enclosure, screw on the ft cover, plug the USB C cable, connect to the computer.