Clone Hard Drive Docking Station:
WEme USB 3.0 to SATA Dual-Bay External Hard Drive Docking Station with Offline Clone/Duplicator Function for 2.5 & 3.5 Inch HDD SSD SATA (SATA I/II/ III). As the best hard drive docking station, WEme hard drive copier easily connects a hard drive to a laptop, makes cloning easier, supports up to 2X 18TB & UASP, Tool-Free. How to Clone: just plug in 2 hard drives and press the "Copy" button for 3 seconds.
HDD/SSD Offline Hard Drive Cloner Features:
- USB 3.0 to SATA external hard drive docking station, SATA-III internal, Especially made for 2.5 inches and 3.5 inch SATA HDD/SSD, USB 3.0 SuperSpeed & supports UASP, even faster data transfer.
- Integrated safeguards preventing overvoltage, leak currents, short circuits and peak voltage, interference, and disturbance, guaranteed safer data transfer and access.
- Support 2x 18TB hard drive; Support offline clone, no drivers needed, easy installation; Cloning can only be done from A drive to B drive, make sure the memory capacity of B drive is larger than A drive; Not Support Online Clone.
- Stable and reliable DC power source: The power supply is highly efficient (12V, 3000mA) so that a stable energy supply is guaranteed; Entering sleep mode without operation in 30 minutes.
- WEme dual hard drive docking station with clone function supports UASP and SATA 6Gbps Available. The UASP Transfer Protocol only can accelerate the read and write speed of SSD and HDD. High-class chipset, enhanced with UASP Transfer Protocol, this dock lets you get the most out of the fastest drive technologies such as SATA III (6 Gbps) with performance up to 70% faster than conventional USB 3.0 when paired with a UASP-enabled host controller.
2.5" 3.5" Hard Drive Docking Station:
1. Support 2x 18TB hard drive; Supports 2.5" & 3.5" SATA (SATA I/ II/ III) HDD and SSD.
2. SATA Docking Station Equipped with USB3.0; Support SATA III (6 Gbps) and UASP for optimal performance; Backward compatible with USB 2.0 /1.1.
3. Compatible Systems: Windows 2000/ XP/Vista/ 7/ 8,Mac OS 10.x or higher.
4. On/Off power switch; LED light indicates Power and Activity status; Entering sleep mode without operation in 30 minutes.
1. Cloning can only be done from A drive to B drive, make sure the memory capacity of B drive is larger than A drive.
2. Not Support Online Clone.
3. The target disk must be larger than the source disk.
4. Please backup files in the target hard drive before cloning. Any files in the target hard drive will be overwritten when the offline clone works.
5. Please make sure that there aren't any bad sectors on the drives in use, to avoid data transfer errors, overheating, and damage to the station.
6. Do not try to remove your HDD or SSD device while it is active. Please power off the hard drive copier before removing it.
1x USB3.0 TO SATA Dual BAY Clone Hard Drive Docking Station
1x USB 3.0 Cable
1x 12V/3A Power Adapter